Fujifilm hilft dabei, die Welt zu einem besseren, gesünderen und interessanteren Ort zu machen.
The game has changed. Medium-format re-invented. FUJIFILM announces Development of Professional-use Mirrorless Camera System “GFX”.
The shooting mode button (Fn2) on the top panel allows you to switch between "Program (P)" and "Shutter Speed Priority (S)" (when the aperture is set to Auto) and between "Aperture Priority (A)" and "Manual (M)" (when the aperture is set to Manual). These selections can be assigned to a function button of your choice in Function (Fn) Setting.
Rotate the Drive Mode Dial to switch between the Still, Multi and Movie modes. Selecting the Still or Movie mode restores the respective settings so that you can start shooting as soon as you switch, without having to adjust settings. The Drive Button allows you to adjust burst speed and video frame rate. The Dial Lock Release Button prevents any accidental use.
Numerous function (Fn) buttons are provided at various points on the camera body allowing you to assign your preferred settings for easy access. The 16 items shown in the Q (Quick) menu and C1 - C7 can also be reconfigured to instantly access your favorite Film Simulation modes or image quality settings. The camera also supports "My Menu," where your most frequently-used items can be stored.
Six types of bracketing are available to capture multiple frames at different settings with a single press of the shutter release. This function works with both JPEG and RAW formats.
|AE Bracketing||Frames: -2, -3, +3, +2, ±9, ±7, ±5, ±3 |
±1/3EV - ±3EV, 1/3EV step
|Film Simulation Bracketing||Any 3 Types of Film Simulation Selectable|
|Dynamic Range Bracketing||100% · 200% · 400%|
|ISO Sensitivity Bracketing||±1/3EV / ±2/3EV / ±1EV|
|White Balance Bracketing||±1 / ±2 / ±3|
|Focus Bracketing||Interval, Number of shots, 10 step|
The electronic level uses a 3D system which is highly effective for architecture or landscape photography, when the accuracy of horizontal and vertical lines is crucial. Four types of histogram can be displayed: RGB and brightness, each with or without highlight warnings.
Use the touchscreen panel to enter "Author" and "Copyright" to your file's EXIF data. Record your voice for up to 30 seconds to make notes about the images you are shooting to keep track of your shoots.
Sample unique shooting styles including fixed point photography, time lapse and self timer images with controls over shooting interval, total number of frames and shutter delay. The Self Timer function can be set at 2 sec. or 10 sec. The former is particularly useful for situations when you want to minimize camera shake, such as long exposures.
|Shooting Interval||1sec. - 24 hours|
|Number of Frames||1 - 999 + ∞|
|Shutter Delay||In 0min. - 24 hours|
Install the free application "FUJIFILM Camera Remote" on your smartphone or tablet device to shoot via Live View and transfer your camera images to your device. The camera can also be paired with your device via Bluetooth® to automatically transfer images. Using the app you can also update the camera firmware directly.
The GFX100 offers four metering modes: multi metering, spot metering, average metering and center-weighted metering. When using the spot-metering mode, the selected focus area can also be used for metering. The options allow you to adjust metering according to the surrounding environment or your subject matter.
|Multi||Calculates exposure based on analysis of the whole frame|
|Spot||Takes a meter reading from an area occupying approx. 2% of the frame|
|Average||Sets exposure based on the average brightness of the entire frame|
|Center Weighted||Takes a meter reading mainly from the center of the frame|
The standard ISO sensitivity range is ISO100-12800, with extended sensitivities of ISO50, ISO25600, ISO51200 and ISO102400. RAW format is supported at all ISO settings. The AUTO function allows you to set the standard ISO, low shutter speed limit and upper ISO limit, and configure AUTO 1 - 3 settings according to shooting conditions.
|Still||Standard Output: AUTO1 / AUTO2 / AUTO3 (up to ISO12800) / ISO100 to 12800 (1/3 step) |
Extended Output: ISO50 / 25600 / 51200 / 102400
|Movie||Standard Output: AUTO (up to ISO12800) / ISO100 to 12800 (1/3 step) |
Extended Output: ISO25600
In standby mode, all displays except the Sub LCD Monitor and Rear Sub Monitor turn off to save power when the camera is not in use. Choose the length of time your camera will wait before entering standby mode: 5 min, 2 min, 1 min, 30 sec., or 15 sec.
The GFX100 can be powered and recharged via the USB-C port, enabling an extended shooting and removing any worries about running out of power. While traveling to a shoot or when on an outdoor shoot, you can use a USB PD(Power Delivery) power source which can power the camera or rapidly recharge the battery. If you use device with over 30W delivery, you can charge two batteries simultaneously and quickly(USB PD Rev2.0 ver1.3).
Check the age of the batteries in the camera. Battery age is expressed as a number between 0 (youngest) and 4 (oldest).
Fujifilm Corporation is a wholly-owned subsidiary of Fujifilm Holdings Corporation.