Combining a robust, durable body with superior image quality and easy operation, the FUJIFILM X-H1 is the first camera in the series to include 5-axis 5.5 stops (*1)in-body image stabilization (IBIS), and the new Eterna Film Simulation feature, for outstanding video reproduction.
FUJIFILM Corporation (President: Kenji Sukeno) is delighted to announce the launch of the FUJIFILM X-H1 camera, the highest performance camera in the X Series range of mirrorless cameras, known for its superior image quality created using FUJIFILM's proprietary color reproduction technology.
The X-H1, with a newly-designed robust and durable body, incorporates a range of extremely useful features that support shooting in various scenarios demanded by professional photographers, videographers. The X-H1 is the first X Series model to include the latest 5-axis in-body image stabilization (IBIS), which has a maximum of 5.5 stops (*1) as well as a flicker reduction mode which enhances the quality of indoor sports photography.
In combination with the existing FUJINON XF lens range, the camera allows the use of the 5-axis image stabilization in excess of 5-stops, with the exception of some lenses (*2).
The camera is also compatible with a range of other interchangeable lenses due for release later this year. These include the MKX18-55mmT2.9 and MKX50-135mm T2.9 professional cinema lenses which incorporate the X mount (scheduled for release in May 2018), the XF200mmF2 R LM OIS WR, a wide aperture single-focus telephoto lens, and XF8-16mmF 2.8 R WR, designed to meet the needs of scenery or landscape photographers, both of which are scheduled for release by the end of 2018. The new camera and lens combinations will provide outstanding image production and will be ideal for fast action sports photography.
*1 With XF 35mmF1.4 lens attached
*2 XF10-24mmF4 R OIS, XF18-55mmF2.8-4 R LM OIS, XF55-200mmF3.5-4.8 R LM OIS
The first internal in-body image stabilization (IBIS) system to feature in an X Series camera, harnesses three axial accelerometers, three axial Gyro sensors, and a specially developed dual-processor. Combined, this achieves the high speed of approximately 10,000 calculations per second. When unified with compensating mechanisms, results in uncompromising image quality and precision with performance as described below.
The following technical breakthroughs have been developed to support this high precision performance:
The X-H1 uses the APS-C size X-Trans™ CMOS III (*3) sensor (24.30 million pixels, without low-pass filter) and the high-speed image processing engine X-Processor Pro. This proprietary FUJIFILM technology was first seen in the X-Pro2 and then X-T2 cameras, receiving many awards globally. When used in combination with the extremely high-quality FUJINON lens, as well as the unique color reproduction technology developed by FUJIFILM more than 8 decades ago, the X-H1 produces outstanding, unrivaled quality images recording the finest details of the subject including its texture, three-dimensional structure and even the atmosphere and vibe of a particular scene.
*3 X-Trans is a trademark or registered trademark of FUJIFILM. The X-Trans CMOS III sensor uses a unique non-periodic filter array to reduce the appearance of moire patterns and false colors even without an optical low-pass filter.
The X-H1 is the first camera in the X Series to include ETERNA, a new film simulation ideal for shooting movies. This mode simulates cinematic film, creating understated colors and rich shadow tones, greatly enhancing creative freedom during post-processing. The camera's video image quality has been improved through the new ability to record a high bit rate of 200 Mbps. The camera includes a total of 20 functional and performance improvements including the 1080/120P high-speed video mode (1/2, 1/4 and 1/5 speed slow motion) for recording spectacular slow-motion footage, F-log*4 SD card recording which aids smooth workflow, a DCI 4K shooting mode (4096×2160), a 400% dynamic range setting (approximately 12 stops), 200 Mbps high bit rate recording, a high-sound quality internal microphone (24 bit/48 kHz) and verbal time codes.
*4 The color space is defined according to ITU-R BT.2020.
Flicker reduction modes are essential for indoor sport photography, and the X-H1 achieves this using a mirrorless camera, allowing for stable exposure during burst shots even under fluorescent and mercury lighting.
In addition, improvements to the AF algorithm have achieved the following performance enhancements:
|Model name||FUJIFILM X-H1|
|Number of effective pixels||24.3 millions pixels|
|Image sensor||23.5mm×15.6mm (APS-C) X-Trans CMOS III with primary color filter.|
|Sensor cleaning system||Ultra Sonic Vibration|
|Storage media||SD Card (~2GB) / SDHC Card (~32GB) / SDXC Card (~256GB) UHS-I / UHS-II*1|
|Lens mount||FUJIFILM X mount|
|Image Stabilizer Mechanism||Image sensor shift mechanism with 5-axis compensation|
|Compensation Effect||5.5 stops (based on CIPA standard. Pitch/yaw shake only. With XF35mmF1.4 R lens mounted.|
|Sensitivity Standard output||AUTO1 / AUTO2 / AUTO3 (up to ISO12800) / ISO200~12800 (1/3 step)|
|Viewfinder||0.5 inch approx. 3.69 millions dots OLED Color Viewfinder Coverage of viewing area vs. capturing area: approx. 100% Eyepoint: approx. 23mm (from the rear end of the camera’s eyepiece) Diopter adjustment: -4~+2m-1 Magnification: 0.75× with 50mm lens (35mm equivalent) at infinity and diopter set to -1.0m-1 Diagonal angle of view: approx. 38° (Horizontal angle of view: approx. 30° ) Built-in eye sensor|
|LCD monitor||3.0 inch, aspect ratio 3:2, approx. 1.04 millions dots touch screen color LCD monitor(approx. 100% coverage)|
|Continuous shooting||14.0 fps (with the Electronic Shutter), 8.0 fps (with the Mechanical Shutter) 11.0 fps (with the Mechanical Shutter and when fitted with VPB-XH1)|
|Movie recording||[4K (4096×2160)] 24P / 23.98P up to approx. 15min. [4K (3840×2160)] 29.97P / 25P / 24P / 23.98P up to approx. 15min. [Full HD (1920×1080)] 59.94P / 50P / 29.97P / 25P / 24P / 23.98P up to approx. 20min. [HD (1280×720)] 59.94P / 50P / 29.97P / 25P / 24P / 23.98P up to approx. 30min.*For recording movies, use a card with UHS Speed Class 3 or higher.*With Vertical Power Booster Grip attached, individual movie recording time is extended up to approx. 30min. on both 4K and Full HD mode.|
|Wireless transmitter||Standards: IEEE 802.11b / g / n [standard wireless protocol] Access mode: Infrastructure Encryption: WEP / WPA / WPA2 mixed mode|
|Bluetooth®||Standard： Bluetooth Ver. 4.0(Bluetooth® low energy) Operating frequency (Center frequency)： 2402～2480MHz|
|Power supply||NP-W126S Li-ion battery (included)|
|Dimensions / Weight||((W) 139.8mm × (H) 97.3mm × (D) 85.5mm (minimum depth 39.5mm) Approx. 673g (including battery and memory card) Approx. 623g (excluding battery and memory card)|
|Battery life for still images *2||Approx. 310frams (Normal Mode) When XF35mmF1.4 R is set.|
|Accessories included||Li-ion battery NP-W126S, Battery charger BC-W126, Shoe-mount flash unit EF-X8, Shoulder strap, Body cap, Strap clip, Protective cover, Clip attaching tool, Hot shoe cover, Vertical Power Booster Grip connector cover, Sync terminal cover, Cable protector Owner's manual|
*1 Please see the Fujifilm website (http://www.fujifilm.com/support/digital_cameras/compatibility/card/x/ ) to check memory card compatibility. *2*Measured according to the CIPA standards, using the included battery and an SD card. The number of frames that can be taken per charge varies depending on a battery's charge capacity. This figure is not a guarantee of battery's working capacity. At low temperatures, the number of frames per charge decreases.