Enabling flash photography at high shutter speeds or using multiple units in sync.
FUJIFILM Corporation (President: Kenji Sukeno) has announced that, on September, 2016, the company will add the high-end multi-function external flash “Hot-shoe mount flash EF-X500” to the lineup of accessories for the X Series of digital cameras.
The EF-X500 is a hot-shoe mount flash with the maximum guide number of approx. 50*1. Its support for the FP mode (high-speed flash sync) means the flash can be fired at any shutter speed. This means you can concentrate on shooting when a faster shutter speed is required, for example, in order to use a near-maximum aperture to produce beautiful bokeh.
EF-X500 also supports multi-flash lighting. Set up multiple flashes to freely control light on a subject and background for a creative result. TTL lighting control is available with single flash and also in the multi-flash setup, so that you can start shooting without having to make cumbersome adjustments to light output.
|Product name||Release date||Recommended retail price|
|Hot-shoe mount flash EF-X500||September, 2016||Open|
With cameras equipped with a focal plane shutter, when the shutter speed is high, the first and second shutter curtains move across at the same time, making the exposure through a narrow vertical slit between them. Because of this, light from a conventional flash can only reach a small section of the sensor. This is why a slower shutter speed must be used in flash photography, with the range of available shutter speeds severely limited.
EF-X500 supports the FP mode (high-speed flash sync), in which the flash outputs continuous light while the first and second curtains travel across the sensor, thereby enabling flash photography at any shutter speed.
When shooting with a near-maximum aperture to create beautiful bokeh, the shutter speed tends to go higher. This flash mode frees photographers from having to be conscious about shutter speed limitations, and instead allows them to focus on shooting.
EF-X500 can be used in multi-flash setup to freely control light on a subject and background for a creative result. TTL lighting control is available with single flash and also in the multi-flash setup, so that you can start shooting without having to make cumbersome adjustments to light output.
Multiple flashes can be controlled in up to three groups, each of which can be set up to have different light output, allowing you to fine-tune the space of light. As the light output can also be adjusted from the camera, you don’t need to set it down for lighting control.
This is the first Fujifilm flash that is dust-resistant and weather-resistant. Use it with the weather-sealed X Series of cameras to broaden your photographic fields.
The front side of EF-X500’s main body is applied with leather texture to compliment the design of the X Series of cameras. It is designed with low center of gravity to maintain ease of operation when mounted on the X Series of cameras, known for their light weight and compact bodies.
*1 At illumination angle for the focal length of 105mm (35mm format equivalent)
*2 35mm format equivalent
The external battery pack “EF-BP1” takes eight AA batteries to shorten charging time and improve the number of flashes per charge.
|Product name||Model number||Recommended retail price (excl. tax)|
|Battery pack <NEW>||EF-BP1||-|
|Type||Type||Hot-shoe mount flash|
|Compatible cameras *1||FUJIFILM X-T1, X-T2, X-Pro2|
|Flash head||Guide number||Up to approx. 50 (ISO100?m) / 164 (ISO100?ft)(at illumination angle of 105mm*2)|
|Flash coverage||24mm-105mm *2, Auto Zoom function, Approx. 20mm when using the Wide Panel*2|
|Bounce||90øup, 10ødown, 135øleft and 180øright|
|Color temperature||Approx. 5600K (at full output)|
|FP (high speed flash sync) mode||Supported*3|
|Exposure control||Exposure control system||TTL, Manual, Multi-flash (Manual)|
|TTL compensation||-5.0EV - +5.0EV at 1/3-step increments* This setting may not be reflected in some shooting conditions.|
|Manual flash power||1/1 - 1/512 at 1/3-step increments *Flash settings become slightly restricted in the FP mode.|
|Multi-flash power||1/4 - 1/512 at 1/3-step increments|
|Charge||Firing interval (at full power and full charge)||Approx. 2.5 seconds (Nickel-hydrogen battery)|
|Number of flashes (at full power and full charge)||Approx. 170 times (Nickel-hydrogen battery)|
|Wireless multi-flash system||Communication method||Optical transmission|
|Operation modes||Master (TTL / Manual / Multi-Flash / OFF)|
|Communication channels||Ch1 - 4|
|Slave unit groups||Up to 3 groups (A / B / C)|
|Other functions||Wireless slave flash||Supported (P-MODE /N-MODE)|
|LED video light||Supported (built-in)|
|LED AF assist light / catchlight||Supported (built-in)|
|Reflector panel||Supported (built-in)|
|Included items||Included items||Soft case|
|Power source||Power source||Four AA batteries (LR6 or Ni-MH)|
|External power source||Battery Pack EF-BP1 (optional)|
|Dimensions and weight||Dimensions||Approx. 124.0mm (H) x 67.2mm (W) x 107.3mm (D)|
|Weight||Approx. 380g (excluding batteries)|
*1 See the latest list of compatible cameras on Fujifilm website (http://www.fujifilm.com/support/digital_cameras/compatibility/flash/). Firmware update is required for FUJIFILM X-T1 and X-Pro2.
*2 35mm format equivalent
Corporate Communications Div.
Customer Communication Center