This website uses cookies. By using the site you are agreeing to our Privacy Policy.

Македонија

FUJIFILM release new firmware for the X-T1, X100T, S1 and a series of lenses

27.03.2015
FUJIFILM Corporation have released firmware upgrades for the following products to enhance operability and functions.

Firmware version

  1. (1) X-T1 and X-T1GS : 3.10 (current 3.00)
  2. (2) X100T : 1.10 (current 1.00)
  3. (3) S1 : 1.02 (current 1.01)
  4. (4) XF18-55mm : 3.12 (current 3.11)
  5. (5) XF55-200mm : 1.12 (current 1.11)
  6. (6) XF18-135mm : 1.01 (current 1.00)
  7. (7) XF10-24mm : 1.01 (current 1.00)

Release date

31st March 2015

X-T1 firmware updates

Improved flash functionality

When using an external non-TTL flash, it will now fire when the "MECHANICAL+ELECTRONIC" is selected in the "SHUTTER TYPE" option of the SHOOTING MENU.
If "S (Shutter-Priority)" or "M (Manual Exposure)" mode is selected, set the shutter speed to 1/180 sec. or slower.

Improved WIFI

Improved Wi-Fi communication when "FUJIFILM PC AutoSave" is used. The phenomenon is fixed that Wi-Fi communication with "FUJIFILM PC AutoSave" stops at the moment the LCD turns off.

Improved "USB MODE" functionality

(i)When "PC SHOOT FIXED" is selected, the warning of "IMAGES ARE NOT SAVED IN THE CARD" appears. images not saved on the card (ii)If "PC SHOOT FIXED" is selected in the "USB MODE" and the camera is not connected to a PC via a USB cable, you cannot turn off the camera when you turn the ON/OFF switch to the OFF position or remove the lens from the camera because the camera stays in the waiting mode for image transfer. With this upgrade, the message below will appear to confirm whether you stop the image transfer to the PC or not in such operations. If you press "OK" button, the camera will turn off without recording images. images not saved on the card
     
 
  • * Note: "PCSHOOT AUTO" and "PS SHOOT FIXED" in the "USB MODE" are the modes to use PC shooting software like the optional accessory HS-V5. If you don't use such a software, select "MTP(PTP)" in the "USB MODE".
 
     

X100T firmware updates 

"CONVERSION LENS" setting updated

When an Fn button with "CONVERSION LENS" setting is pressed, one of the messages below appears in a cyclic manner in addition to the icons. conversion cycle

Improved flash functionality

When using an external non-TTL flash, it will now fire when the "MECHANICAL+ELECTRONIC" is selected in the "SHUTTER TYPE" option of the SHOOTING MENU.

Updated viewfinder display

When the dual optical viewfinder/electronic range finder (ERF) display is used with the Digital Split Image, the white Focus frame appears in the centre of the viewfinder.

Improvement of Focus Peaking display

Focus peaking improved in the electronic viewfinder for darker environments to help with focusing. 

FinePix S1 firmware update

Improved image quality

Image quality improved (sharpness) when using continuous shooting mode.

Lens firmware update

Stability improvement for the OIS Function with the following lenses: 
  • XF18-55mm
  • XF55-200mm
  • XF18-135mm
  • XF10-24mm
Click here to visit the firmware download page.
Најнови вести:
  • Digital Cameras