High Definition, Highly Evolved.
Improved image quality with noise reduction circuitry and a variety of functions to support imaging. Introducing FDR D-EVO II, now fully evolved
The shell design, with its curved profile, allows for easier insertion into patient beds. This easy-to-grasp shape makes the panel easy to pick up even when placed flat, improving task efficiency.
The D-Evo Panel is equipped with LEDs at the center of each of the four sides to make it easy to check the center position during imaging. Select from five colors when using multiple detectors (blue, pink, orange, lime-yellow and purple) to make it easier to distinguish devices. In sleep mode, the side-center LEDs switch to a gentle flashing pattern, allowing you to see the state of the detector at a glance.
The back of the detector is equipped with an LED lamp that displays the remaining battery level. This makes it easy to check the level of remaining battery and eliminates worries when using the detector.
The regular sleep mode provides up to 7.5 hours of standby time, whereas the newly added extra sleep mode can provide up to 18.5 hours of standby time. In sleep mode, the center LED on the side of the detector flashes slowly to indicate the detector status at a glance.
A dedicated docking stand synchronizes with the console to display the “Ready” status and identification color of the detector in use via an LED display. This makes it easy to check the current state of the detector even from far away.
Designed to prevent the infiltration of liquids, the device conforms to the IPX6 waterproofing standard and can withstand jets from any direction*. There is no need to worry that fluids such as blood or vomit could infiltrate the device.
The innovative SRM** frame combines a lightweight design with a 310kg load capacity on all surfaces. By reinforcing the frame internally with a rib structure this also improves the flex resistance of the detector.
Weighing only 3.2 kg (with battery) this lightweight design is made possible by the magnesium-alloy shell-type frame (SRM** frame). As a result it can easily be maneuvered behind the patient.
Supporting both 2.4GHz and 5GHz (W52 / 53 / 56 / 58)*** spectrums; the D-EvoII is suitable for outdoor use during disasters.
The detector itself can store up to 100 images in internal memory. This eliminates the need to carry around multiple CR cassettes as with conventional systems. Furthermore, it makes it possible to perform rapid imaging, such as at night or during an emergency.
The FPD is equipped with an indirect conversion system flat detector display using ISS. Unlike in traditional flat panel detectors this technology bonds optical sensors (TFT) to the X-ray irradiation side. This greatly suppresses scattering and attenuation of X-ray signals, creating sharp images with even low doses of X-rays.
Our uniquely designed scintillator applies photographic film technology to optimize the blend ratio of GOS phosphor particles of different sizes and increase X-ray absorption.
The uniquely developed noise reduction circuit reduces image noise. This new panel achieves 1.7 times the DQE of existing systems (D-EVO G43i/s) with a 0.03 mR dose. In particular, graininess of low- penetration regions such as the heart and mediastinum is dramatically improved.